Timberland PRO

Timberland PRO Authorized Reseller Get ready to step out and withstand the outdoor conditions wearing the Timberland PRO Switchback Composite Safety Toe Waterproof footwear. Asymmetrical composite safety toe meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. Lace-up work boot with a lightweight composite safety and Electrical Hazard (EH) protection meets ASTM F2412-18a, ASTM F2413-18 standards. Slip-resistant, non-marking rubber outsoles are tested to ASTM F3445-21 and ASTM F2913-19 Non-Slip Testing Standards. Rubber outsole with Mark II oily wet #3 on American Olean tile at .40. Waterproof abrasion-resistant leather upper. Moisture-wicking lining. Removable Anti-fatigue Technology polyurethane insole. EVA midsole. Fiberglass shank adds structural support. Lace up closure. Ankle pull tab. Imported. Measurements: Weight: 1 lb 12 oz Product measurements were taken using size 8, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Be prepared for any job in the Timberland PRO Switchback Low Composite Safety Toe shoes. Composite safety toe meets ASTM F2412-18a and ASTM F2413-18 I and C impact and compression, EH (Electrical Hazard) safety standards and CAN/CSA-Z195-14 Grade 1. Low top cut. Pull tabs at heels. Lace-up closures. Logo patch on tongues. Removeable insoles. Rounded, closed toe silhouette. Toe guard design. Leather and textile uppers. Textile linings and insoles. Slip resistant non-marking rubber outsole meets ASTM F2913-19 standards. Imported. Measurements: Weight: 1 lb 6 oz Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Tackle the tough jobs in the Timberland PRO Switchback LT 6 Inch Soft Toe Waterproof Industrial Work Hiker Boots. Featuring a lace-up closure, round toe silhouette, padded tongue and collar for added support, pull tab in back for easy on and off access, and Timberland PRO 24/7 Comfort System that helps reduce foot fatigue 24 hours a day, 7 days a week. Soft toe. Suede upper. Mesh lining. Polyurethane insole. Waterproof membrane delivers maximum waterproof protection and blood-borne pathogen resistance. Meets ASTM F1671-07 safety standard. Non-metallic ghillie lacing system. Non-metallic shank for structural support. Cement construction for flexibility. Heat, slip, oil, and abrasion resistant rubber outsole meets or exceeds Electrical Hazard (EH) ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 standards and Mark II Oily wet #3 on American Olean tile exceeds .40. Style Number: TB0A2CC6065 (Grey/Blue) TB0A2CCH214 (Brown/Gum) Imported. Measurements: Heel Height: 1 1 2 in Weight: 1 lb 8 oz Circumference: 9 1 4 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Tackle the tough jobs in the Timberland PRO Switchback LT 6 Inch Soft Toe Waterproof Industrial Work Hiker Boots. Featuring a lace-up closure, round toe silhouette, padded tongue and collar for added support, pull tab in back for easy on and off access, and Timberland PRO 24/7 Comfort System that helps reduce foot fatigue 24 hours a day, 7 days a week. Soft toe. Suede upper. Mesh lining. Polyurethane insole. Waterproof membrane delivers maximum waterproof protection and blood-borne pathogen resistance. Meets ASTM F1671-07 safety standard. Non-metallic ghillie lacing system. Non-metallic shank for structural support. Cement construction for flexibility. Heat, slip, oil, and abrasion resistant rubber outsole meets or exceeds Electrical Hazard (EH) ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 standards and Mark II Oily wet #3 on American Olean tile exceeds .40. Style Number: TB0A2CC6065 (Grey/Blue) TB0A2CCH214 (Brown/Gum) Imported. Measurements: Heel Height: 1 1 2 in Weight: 1 lb 8 oz Circumference: 9 1 4 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Tackle the tough jobs while keeping your feet comfy and protected in the Timberland PRO Switchback LT 6 Inch Steel Safety Toe Industrial Work Hiker Boots. Featuring a lace-up closure in a round toe silhouette with a padded tongue and collar, pull tab in back and Timberland PRO 24/7 comfort suspension system technology that helps reduce foot fatigue, supports the arch and cushions every step. Metallic, asymmetrical-shaped steel safety toe meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. Full grain leather upper. Breathable, moisture-wicking mesh lining. Contoured polyurethane insole. Water resistant technology. Non-metallic shank. Ethyl vinyl acetate midsole. Non-marking, oil-, heat-, slip-, and abrasion-resistant rubber outsole meets ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 EH (Electrical Hazard) standards. Style Number: TB0A2MTA214 (Brown/Gum) TB0A6183214 (Coconut/Red) Imported.

Timberland PRO Authorized Reseller Tackle the tough jobs while keeping your feet comfy and protected in the Timberland PRO Switchback LT 6 Inch Steel Safety Toe Industrial Work Hiker Boots. Featuring a lace-up closure in a round toe silhouette with a padded tongue and collar, pull tab in back and Timberland PRO 24/7 comfort suspension system technology that helps reduce foot fatigue, supports the arch and cushions every step. Metallic, asymmetrical-shaped steel safety toe meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. Full grain leather upper. Breathable, moisture-wicking mesh lining. Contoured polyurethane insole. Water resistant technology. Non-metallic shank. Ethyl vinyl acetate midsole. Non-marking, oil-, heat-, slip-, and abrasion-resistant rubber outsole meets ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 EH (Electrical Hazard) standards. Style Number: TB0A2MTA214 (Brown/Gum) TB0A6183214 (Coconut/Red) Imported.

Timberland PRO Authorized Reseller The Timberland PRO hard-working Switchback LT men's hikers are designed to conquer your job site with their steel safety toes, electrical hazard protection, and the Timberland PRO 24/7 Comfort System that helps reduce foot fatigue 24 hours a day, 7 days a week. Their premium full grain leather uppers feature a breathable, moisture-wicking mesh lining made of ReBOTL material containing at least 50% recycled plastic, and flexible cement construction. There's also a non-metallic shank for structural support and a contoured polyurethane footbed and EVA midsole for all-day comfort. Traction and durability are enhanced with their heat-, oil-, slip-, and abrasion-resistant, non-marking rubber outsoles. Steel Safety Toe meets ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1 standards. SD10: Protects against hazards related to excessively low footwear resistance and meets SD10 static-dissipative ASTM F2412-18a, ASTM F2413-18 and ASTM F2892-18 safety standards. Imported. Measurements: Heel Height: 1 1 2 in Weight: 1 lb 8 oz Circumference: 9 1 4 in Product measurements were taken using size 9, width E - Wide. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Bring power to your steps and create your own footprints wearing the Timberland PRO Switchback LT Waterproof Soft Toe. Waterproof leather and textile upper. Mesh lining. Removable polyurethane footbed. EVA blend foam midsole offers high-rebound cushioning. Waterproof construction. Fiberglass shank for structural support. Timberland PRO 24/7 comfort system. Cement construction offers flexibility. Lace-up closure. Brand logo on the tongue. Grip Max Ice outsole pads. Oil and slip-resistant rubber outsoles are tested to ASTM F2913-19 Non-Slip Testing Standards. Imported. Measurements: Heel Height: 1 in Weight: 1 lb 5.032 oz Circumference: 10 in Shaft: 6 in Platform Height: 1 1 2 in Product measurements were taken using size Men's 5.5, Women's 7, width Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Get ready to hike the tallest mountains wearing the Timberland PRO Switchback Soft Toe Waterproof shoes. Lace-up soft toe work boot and Electrical Hazard (EH) protection that meets ASTM F2892-18 standards. Slip resistant non-marking rubber outsole meets ASTM F3445-21 and ASTM F2913-19 Mark II standards. Waterproof abrasion-resistant leather upper with waterproof membrane. Moisture-wicking lining. Removable Anti-Fatigue Technology polyurethane insole. EVA midsole. Fiberglass shank adds structural support. Shock absorption for added comfort. Ankle pull tab. Cement construction adds flexibility. Imported. Measurements: Weight: 1 lb 10 oz Product measurements were taken using size 8, width D - Medium. Please note that measurements may vary by size. Weight of footwear is based on a single item, not a pair.

Timberland PRO Authorized Reseller The primary materials that compose this product contain a minimum of 20 percent recycled content. Work with utmost convenience and safety wearing Timberland PRO TITAN EV 6 Composite Safety Toe. Asymmetrical composite safety toe meets or exceeds ASTM F2412-18a/ASTM F2413-18 I and C (impact and compression), EH (Electrical Hazard) safety standards. Premium full-grain leather upper. Breathable and moisture-wicking recycled polyester lining for odor control. Anti-fatigue technology removable polyurethane footbed for shock absorption and energy return. Cement construction for flexibility. Fiberglass shank for structural support. Lace closure. Top speed hooks for instant lacing. Lightweight Hover Spring foam midsole for industry leading underfoot comfort, flexibility, and durability. Slip-resistant Timberland PRO rubber convex outsole meets or exceeds ASTM F2913-19 standard for indoor or outdoor traction. Imported. Measurements: Heel Height: 1 in Weight: 1 lb 5.032 oz Circumference: 9 1 2 in Shaft: 6 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller The primary materials that compose this product contain a minimum of 20 percent recycled content. There's a new TiTAN boot on the job our next generation EV style has our lightweight Hover Spring foam midsole that provides industry-leading comfort and flexibility, while retaining the durability you need for harsh work environments. Starting with a Premium Timberland full-grain leather, a composite safety toe, cement construction for flexibility, electrical hazard protection, our Anti-Fatigue Technology footbed, and a non-marking Timberland PRO rubber convex outsole that is heat-, oil-, slip-, and abrasion-resistant for superior indoor and outdoor traction. Plus, its breathable, moisture-wicking lining is made of ReBOTL material containing at least 50% recycled plastic. Anti-Fatigue Technology: A comfort system designed with shock-absorbing, geometrical technology that returns energy back to the foot to deliver all-day support and comfort. Composite Safety Toe: Lightweight, non-metallic, asymmetrical-shaped toe cap. Meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. HoverSpring: Our proprietary lightweight HoverSpring foam provides industry leading underfoot comfort and flexibility while being durable enough for the harshest environments. Timberland PRO Rubber: Heat-resistant, durable rubber compound offers enhanced slip, oil and abrasion resistance. Imported. Measurements: Weight: 1 lb 8 oz Circumference: 9 3 4 in Shaft: 6 in Product measurements were taken using size 9.5, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller The primary materials that compose this product contain a minimum of 20 percent recycled content. Feel the distinction of style and innovation by wearing Timberland PRO TITAN EV 6 Composite Safety Toe Waterproof footwear. Asymmetrical composite safety to meets or exceeds ASTM F2412-18a/ASTM F2413-18 I and C (impact and compression), EH (Electrical Hazard) safety standards. Full-grain waterproof leather upper with waterproof membrane. Breathable, moisture-wicking, recycled polyester lining. Removable, anti-fatigue technology polyurethane footbed. Cement construction for flexibility. Lace closure. Top speed hooks for instant lacing. Fiberglass shank. Rear pull-tab. Lightweight, hover SpringTM foam midsole. Slip-resistant Timberland PRO rubber convex outsole meets or exceeds ASTM F2913-19 standard. Imported. Measurements: Heel Height: 1 in Weight: 1 lb 5.032 oz Circumference: 9 1 2 in Shaft: 6 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller The primary materials that compose this product contain a minimum of 20 percent recycled content. Feel the distinction of style and innovation by wearing Timberland PRO TITAN EV 6 Composite Safety Toe Waterproof footwear. Asymmetrical composite safety to meets or exceeds ASTM F2412-18a/ASTM F2413-18 I and C (impact and compression), EH (Electrical Hazard) safety standards. Full-grain waterproof leather upper with waterproof membrane. Breathable, moisture-wicking, recycled polyester lining. Removable, anti-fatigue technology polyurethane footbed. Cement construction for flexibility. Lace closure. Top speed hooks for instant lacing. Fiberglass shank. Rear pull-tab. Lightweight, hover SpringTM foam midsole. Slip-resistant Timberland PRO rubber convex outsole meets or exceeds ASTM F2913-19 standard. Imported. Measurements: Heel Height: 1 in Weight: 1 lb 5.032 oz Circumference: 9 1 2 in Shaft: 6 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Take on the tough jobs in the Timberland PRO TITAN EV 6 Composite Safety Toe Waterproof boots. Featuring a lace-up closure with metal eyelets, round toe silhouette, padded tongue and collar, and pull tab in back. Composite safety toe meets or exceeds ASTM F2412-18a and ASTM F2413-18 I/C (Impact and Compression) safety standards. Waterproof leather and textile upper. Breathable, moisture-wicking textile lining. Removable textile insole. Cement construction for flexibility. Lightweight Hover Spring foam midsole provides industry-leading underfoot comfort, flexibility, and durability. Branding on heel counter. Non-marking heat-, oil-, slip-, and abrasion-resistant, meets or exceeds ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18, EH (Electrical Hazard), Mark II safety standards. Style Number: TB0A5P1A214 (Brown) TB0A5WUY001 (Black) Imported. Measurements: Weight: 1 lb 8 oz Shaft: 6 in Product measurements were taken using size 9, width C - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller The primary materials that compose this product contain a minimum of 20 percent recycled content. Keep going forward by wearing Timberland PRO TITAN EV 6 Soft Toe Waterproof footwear. Full-grain waterproof leather upper with waterproof membrane. Breathable, moisture-wicking, recycled polyester lining. Removable, anti-fatigue technology polyurethane footbed. EH (Electrical Hazard) meets ASTM F2892-18 standard. Cement construction for flexibility. Soft toe. Lace closure. Top speed hooks for instant lacing. Fiberglass shank for structural support. Rear pull-tabs. Lightweight Hover SpringTM foam midsole. Slip-resistant Timberland PRO rubber convex outsole meets or exceeds ASTM F2913-19 standard. Imported. Measurements: Heel Height: 1 in Weight: 1 lb 5.032 oz Circumference: 9 1 2 in Shaft: 6 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Keep your feet dry and comfortable during the long workday in the durable Timberland PRO Titan EV Oxford Composite Safety Toe Industrial Casual Work Shoe. Featuring a lace-up closure in a round toe silhouette, padded tongue and collar for added support, a water resistant full-grain leather upper, and breathable, moisture-wicking lining. Composite safety toe meets or exceeds US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. Metatarsal Guard meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 and CAN/CSA-Z195-14 metatarsal impact resistance. Heat, slip, oil, and abrasion resistant rubber outsole. Anti-Fatigue polyurethane insole offers shock-absorbing, geometrical technology that returns energy back to the foot to deliver all-day support and comfort. HoverSpring foam midsole provides industry leading underfoot comfort and flexibility while being durable enough for the harshest environments. Branding on toe, tongue and heel counter. Style Number: TB0A5XXB214 (Teak Trailblazer 3), TB0A5ZBY001 (Black 5) Imported. Measurements: Circumference: 9 3 4 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Keep your feet dry and comfortable during the long workday in the durable Timberland PRO Titan EV Oxford Composite Safety Toe Industrial Casual Work Shoe. Featuring a lace-up closure in a round toe silhouette, padded tongue and collar for added support, a water resistant full-grain leather upper, and breathable, moisture-wicking lining. Composite safety toe meets or exceeds US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. Metatarsal Guard meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 and CAN/CSA-Z195-14 metatarsal impact resistance. Heat, slip, oil, and abrasion resistant rubber outsole. Anti-Fatigue polyurethane insole offers shock-absorbing, geometrical technology that returns energy back to the foot to deliver all-day support and comfort. HoverSpring foam midsole provides industry leading underfoot comfort and flexibility while being durable enough for the harshest environments. Branding on toe, tongue and heel counter. Style Number: TB0A5XXB214 (Teak Trailblazer 3), TB0A5ZBY001 (Black 5) Imported. Measurements: Circumference: 9 3 4 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller The primary materials that compose this product contain a minimum of 20 percent recycled content. There's a new TiTAN boot on the job our next generation EV style has our lightweight Hover Spring foam midsole that provides industry-leading comfort and flexibility, while retaining the durability you need for harsh work environments. Starting with a Premium Timberland full-grain leather, a composite safety toe, cement construction for flexibility, electrical hazard protection, our Anti-Fatigue Technology footbed, and a non-marking Timberland PRO rubber convex outsole that is heat-, oil-, slip-, and abrasion-resistant for superior indoor and outdoor traction. Plus, its breathable, moisture-wicking lining is made of ReBOTL material containing at least 50% recycled plastic. Anti-Fatigue Technology: A comfort system designed with shock-absorbing, geometrical technology that returns energy back to the foot to deliver all-day support and comfort. Composite Safety Toe: Lightweight, non-metallic, asymmetrical-shaped toe cap. Meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1. HoverSpring: Our proprietary lightweight HoverSpring foam provides industry leading underfoot comfort and flexibility while being durable enough for the harshest environments. Timberland PRO Rubber: Heat-resistant, durable rubber compound offers enhanced slip, oil and abrasion resistance. ReBOTL Material: Products with ReBOTL material contain at least 50% recycled PET (recycled polyethylene terephthalate, the stuff plastic bottles are made of) excepting trace materials. Imported. Measurements: Weight: 1 lb 6 oz Product measurements were taken using size 10, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Planning to go hiking or work in tough conditions? If yes, then get the Timberland PRO Trailwind Composite Safety Toe Waterproof Shoes that offer you comfort in the most difficult terrains. Lightweight, non-metallic, asymmetrical-shaped composite safety toe cap featuring Carbonshield Technology that meets ASTM F2412-18a, ASTM F2413-18, and CAN/CSA-Z195-14 Electrical Hazard (EH) safety standards. Oil and slip-resistant, non-marking rubber outsoles are tested to ASTM F2913-19 Non-Slip Testing Standards. Full-grain waterproof leather upper. Breathable and moisture-wicking lining and removable, polyurethane footbed. Cement construction for flexibility. Signature brand name printed on the upper. Anti-Fatigue Technology with inverted cone system that absorbs shock and returns energy. Lightweight HoverSpring foam for underfoot comfort and flexibility. Technology that prevents and controls odors. Pull loops for easy wear and removal. Classic lace-up closure. Polyurethane midsole. Vibram rubber outsole with high traction and durability. Imported. Measurements: Heel Height: 2 in Weight: 1 lb 15.82 oz Circumference: 10 1 2 in Shaft: 6 in Platform Height: 1 in Product measurements were taken using size 10, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Planning to go hiking or work in tough conditions? If yes, then get the Timberland PRO Trailwind Composite Safety Toe Waterproof Shoes that offer you comfort in the most difficult terrains. Lightweight, non-metallic, asymmetrical-shaped composite safety toe cap featuring Carbonshield Technology that meets ASTM F2412-18a, ASTM F2413-18, and CAN/CSA-Z195-14 Electrical Hazard (EH) safety standards. Oil and slip-resistant, non-marking rubber outsoles are tested to ASTM F2913-19 Non-Slip Testing Standards. Full-grain waterproof leather upper. Breathable and moisture-wicking lining and removable, polyurethane footbed. Cement construction for flexibility. Signature brand name printed on the upper. Anti-Fatigue Technology with inverted cone system that absorbs shock and returns energy. Lightweight HoverSpring foam for underfoot comfort and flexibility. Technology that prevents and controls odors. Pull loops for easy wear and removal. Classic lace-up closure. Polyurethane midsole. Vibram rubber outsole with high traction and durability. Imported. Measurements: Heel Height: 2 in Weight: 1 lb 15.82 oz Circumference: 10 1 2 in Shaft: 6 in Platform Height: 1 in Product measurements were taken using size 10, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller The Timberland PRO True Grit Pull-On Composite Safety Toe Waterproof Internal Met Guard work boots provides superior safety toe protection and comfortable support to keep you going every workday. Style number: A25F5214 (Brown Autumn Backtrack). Pull-on work boots feature a lightweight, non-metallic, asymmetrical-shaped composite safety toe that meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I/75 and C/75 impact and compression standards and CAN/CSA-Z195-14 Grade 1. Internal metatarsal guard powered by SKYDEX Met-Guard impact protection, meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 and CAN/CSA-Z195-14 metatarsal impact resistance. Composite safety toe features CarbonShield technology that strengthens the toe cap for even greater protection while on the worksite. Premium full-grain waterproof leather with a waterproof membrane that keeps out the wet elements. Goodyear Welt Cast-Bond construction. ExoSpine technology for added structure and long-lasting durability. Moisture-wicking lining with odor control technology that provides added breathability and a fresher foot environment. Cushioned PU footbed with Anti-Fatigue technology that provides excellent shock absorption and energy return. Fiberglass shank for added support. Non-marking rubber outsole is oil and slip resistant that is tested to ASTM F2913-2019 Non-Slip Testing Standards. Imported. Measurements: Weight: 2 lbs 8 oz Shaft: 11 1 2 in Product measurements were taken using size 9.5, width D - Medium. Please note that measurements may vary by size.

Timberland PRO Authorized Reseller Take on the tough jobs in lasting comfort in the Timberland PRO Wedge 6 Soft Toe boots. Soft toe meets ASTM F2892-18 EH (Electrical Hazard) standard. Lace-up closure offers a secure fit. Moc toe silhouette. Electrical shock resistant. Padded top collar for comfort. Steel shank for structural support. Full-grain leather upper. Breathable and moisture-wicking lining with treatment for odor. Removable polyurethane footbed. Lightweight, cushioning EVA midsole. Goodyear welt construction for a durable mechanical bond. Slip resistant non-marking Timberland PRO rubber outsole meets ASTM F2913-19 standards. Style Number: TB0A5SXH214-210 (Coconut) Imported. Measurements: Weight: 2 lbs 10.06 oz Circumference: 9 3 4 in Shaft: 6 in Product measurements were taken using size 9, width D - Medium. Please note that measurements may vary by size.